HTS E152
HTS E152
Hole-Making
HTS E152
| Steel | ||
| Stainless Steel | ||
| Hardened Steel ≤52 HRc | ||
| Hardened Steel >52 HRc | ||
| Cast Iron | ||
| Graphite | ||
| Non Ferrous Material | ||
| HRSA | ||
| Titanium |
Recommended
Acceptable
Not Recommended
| CODE | d1(mm) | d2(mm) | d3(mm) | L1(mm) | L2(mm) | L3(mm) | Corner |
|---|---|---|---|---|---|---|---|
| E152 Ø0.50X0.50XØ4X51 R 0.25 Z2 | 0.5 | 4 | 0.47 | 51 | 0.5 | 2 | R 0.25 |
| E152 Ø0.50X0.50XØ4X51 R 0.25 Z2 | 0.5 | 4 | 0.47 | 51 | 0.5 | 3 | R 0.25 |
| E152 Ø0.50X0.50XØ4X51 R 0.25 Z2 | 0.5 | 4 | 0.47 | 51 | 0.5 | 4 | R 0.25 |
| E152 Ø0.60X0.60XØ4X51 R 0.30 Z2 | 0.6 | 4 | 0.55 | 51 | 0.6 | 4 | R 0.30 |
| E152 Ø0.60X0.60XØ4X51 R 0.30 Z2 | 0.6 | 4 | 0.55 | 51 | 0.6 | 6 | R 0.30 |
| E152 Ø0.80X0.80XØ4X51 R 0.40 Z2 | 0.8 | 4 | 0.75 | 51 | 0.8 | 4 | R 0.40 |
| E152 Ø0.80X0.80XØ4X51 R 0.40 Z2 | 0.8 | 4 | 0.75 | 51 | 0.8 | 6 | R 0.40 |
| E152 Ø0.80X0.80XØ4X51 R 0.40 Z2 | 0.8 | 4 | 0.75 | 51 | 0.8 | 8 | R 0.40 |
| E152 Ø1X1XØ4X51 R 0.50 Z2 | 1 | 4 | 0.94 | 51 | 1 | 4 | R 0.50 |
| E152 Ø1X1XØ4X51 R 0.50 Z2 | 1 | 4 | 0.94 | 51 | 1 | 6 | R 0.50 |
| E152 Ø1X1XØ4X51 R 0.50 Z2 | 1 | 4 | 0.94 | 51 | 1 | 8 | R 0.50 |
| E152 Ø1X1XØ4X51 R 0.50 Z2 | 1 | 4 | 0.94 | 51 | 1 | 10 | R 0.50 |
| E152 Ø1X1XØ4X51 R 0.50 Z2 | 1 | 4 | 0.94 | 51 | 1 | 12 | R 0.50 |
| E152 Ø1.50X1.50XØ4X51 R 0.75 Z2 | 1.5 | 4 | 1.4 | 51 | 1.5 | 4 | R 0.75 |
| E152 Ø1.50X1.50XØ4X51 R 0.75 Z2 | 1.5 | 4 | 1.4 | 51 | 1.5 | 6 | R 0.75 |
| E152 Ø1.50X1.50XØ4X51 R 0.75 Z2 | 1.5 | 4 | 1.4 | 51 | 1.5 | 8 | R 0.75 |
| E152 Ø1.50X1.50XØ4X51 R 0.75 Z2 | 1.5 | 4 | 1.4 | 51 | 1.5 | 10 | R 0.75 |
| E152 Ø1.50X1.50XØ4X51 R 0.75 Z2 | 1.5 | 4 | 1.4 | 51 | 1.5 | 12 | R 0.75 |
| E152 Ø2X2XØ4X51 R 1.00 Z2 | 2 | 4 | 1.9 | 51 | 2 | 4 | R 1.00 |
| E152 Ø2X2XØ4X51 R 1.00 Z2 | 2 | 4 | 1.9 | 51 | 2 | 6 | R 1.00 |
| E152 Ø2X2XØ4X51 R 1.00 Z2 | 2 | 4 | 1.9 | 51 | 2 | 8 | R 1.00 |
| E152 Ø2X2XØ4X51 R 1.00 Z2 | 2 | 4 | 1.9 | 51 | 2 | 10 | R 1.00 |
| E152 Ø2X2XØ4X51 R 1.00 Z2 | 2 | 4 | 1.9 | 51 | 2 | 12 | R 1.00 |
* Upon customer request, cutting tools can be manufactured in custom dimensions in
addition to the above dimensions.
** Upon customers request, different types of coatings can be applied.
** Upon customers request, different types of coatings can be applied.
