HTS E200
HTS E200
End Mill
HTS E200
| Steel | ||
| Stainless Steel | ||
| Hardened Steel ≤52 HRc | ||
| Hardened Steel >52 HRc | ||
| Cast Iron | ||
| Graphite | ||
| Non Ferrous Material | ||
| HRSA | ||
| Titanium |
Recommended
Acceptable
Not Recommended
| CODE | d1(mm) | d2(mm) | L1(mm) | L2(mm) | Corner |
|---|---|---|---|---|---|
| E200 Ø3X12XØ4X50 Z1 | 3 | 4 | 50 | 12 | Ch 0.10 |
| E200 Ø4X15XØ4X50 Z1 | 4 | 4 | 50 | 15 | Ch 0.10 |
| E200 Ø5X16XØ6X58 Z1 | 5 | 6 | 58 | 16 | Ch 0.10 |
| E200 Ø6X19XØ6X58 Z1 | 6 | 6 | 58 | 19 | Ch 0.10 |
| E200 Ø7X19XØ8X64 Z1 | 7 | 8 | 64 | 19 | Ch 0.10 |
| E200 Ø8X22XØ8X64 Z1 | 8 | 8 | 64 | 22 | Ch 0.10 |
| E200 Ø9X23XØ10X73 Z1 | 9 | 10 | 73 | 23 | Ch 0.10 |
| E200 Ø10X23XØ10X73 Z1 | 10 | 10 | 73 | 23 | Ch 0.10 |
| E200 Ø11X25XØ12X82 Z1 | 11 | 12 | 82 | 25 | Ch 0.10 |
| E200 Ø12X25XØ12X82 Z1 | 12 | 12 | 82 | 25 | Ch 0.10 |
* Upon customer request, cutting tools can be manufactured in custom dimensions in
addition to the above dimensions.
** Upon customers request, different types of coatings can be applied.
** Upon customers request, different types of coatings can be applied.
