HTS E203
HTS E203
End Mill
HTS E203
| Steel | ||
| Stainless Steel | ||
| Hardened Steel ≤52 HRc | ||
| Hardened Steel >52 HRc | ||
| Cast Iron | ||
| Graphite | ||
| Non Ferrous Material | ||
| HRSA | ||
| Titanium |
Recommended
Acceptable
Not Recommended
| CODE | d1(mm) | d2(mm) | L1(mm) | L2(mm) | L3(mm) | Corner |
|---|---|---|---|---|---|---|
| E203 Ø3X6XØ6X58 R1.50 Z2 | 3 | 6 | 58 | 6 | 12 | R1.50 |
| E203 Ø4X6XØ6X58 R2.00 Z2 | 4 | 6 | 58 | 6 | 13 | R2.00 |
| E203 Ø5X8XØ6X58 R2.50 Z2 | 5 | 6 | 58 | 8 | 15 | R2.50 |
| E203 Ø6X8XØ6X58 R3.00 Z2 | 6 | 6 | 58 | 8 | 15 | R3.00 |
| E203 Ø8X10XØ8X64 R4.00 Z2 | 8 | 8 | 64 | 10 | 19 | R4.00 |
| E203 Ø10X12XØ10X73 R5.00 Z2 | 10 | 10 | 73 | 12 | 29 | R5.00 |
| E203 Ø12X15XØ12X82 R6.00 Z2 | 12 | 12 | 82 | 15 | 29 | R6.00 |
* Upon customer request, cutting tools can be manufactured in custom dimensions in
addition to the above dimensions.
** Upon customers request, different types of coatings can be applied.
** Upon customers request, different types of coatings can be applied.
